## Dimensions of Dockrell 37

## Selected Measurements for Dockrell 37
## Links to our Multi Vendor Used Sail Directory for Dockrell 37## Other Data Base Entries for dockrell 37*Click on boat nane to use
## Sail Area Calculations
The following formulas are approximate Sail areas depend on lots of factors, leach hollow, foot round, luff hollow etc. Also, remember that jib sail area in general is based on the forestay length, I. But all things considered, these numbers are close but should not be considered exact. They are rules of thumb, not measurements of a this specific boat. ## MainsailMainsail = (P x E) / 2 = 207 sq ftRacing Mainsail (add 10%) = 228 sq ft ## Genoa155% Genoa = (( J x I ) / 2) x 1.65 = 470 sq ft135% Genoa = (( J x I ) / 2) x 1.44 = 410 sq ft ## Jib
100% Jib = ( I x J ) / 2 = 285 sq ft A more accurate LP calculator is HERE ## SpinnakerSpinnaker Area = Max Luff x Max Girth x ( 70-85%) = 734 to 891 sq ft"Square" Spinnaker Area = Max Luff x Max Girth) = 1048 sq ft AC Area = 873 sq ft Maximum Luff (.95 * sqrt (JSP^2 + ISP^2) = 38.81 feet Maximum Girth = 1.8 * JSP = 27 feet Ref ## DEFINITIONS"P" is the luff length of the mainsail, measured along
the aft face of the mast from the top of the boom to the highest point
that the mainsail can be hoisted or black band.
" " " " " " " " " ## Data*This data is supplied as a reference and all boat dimensions should be verified before using it in any critical application.The information in these data bases is a starting point. There are errors as you can see as the different data bases do not always agree. In addition, some boats have been modified from stock and will not match the data in these databases. None of this data has been checked by L-36.com so please always check your boat before relying on this data. Data is from a variety of sources.db = PHRF is the PHRF Critical Dimensions database db = WEB is the commonly available data found on many web sites db = BIG is a combination of all of the above. |

Please read website Cookie, Privacy, and Disclamers by clicking HERE.